MedLine TrueBlend TB45

MedLine TrueBlend TB45
Gravimetric Batch Blenders

Get accurate blends, better mixing, faster material changes and increased profits with Conair's TrueBlend Series Blenders. Steep-sided material compartments allow resin to flow evenly and freely through vertical dispense valves into the weigh chamber. Efficient mixing assures full integration of all recipe ingredients. Fully enclosed cabinet design assures no pellet spillage and clean operation. Standard convenient features such as quick access material compartment bins, a hinged chassis access door and removable components in the mixing chamber reduce downtime during cleanout.


  • Calibrated to ISO standards
  • Blend accuracy to 1/2 of 1%
  • Easy-to-use control
  • Convenient, easy clean out
  2. Videos
  3. Contact Us

Contact Us Form

Click here



+1 724 584 5500

Parts & Service

+1 800 458 1960 - United States

+1 814 437 6861 - International

Features (click here to hide)

No pellet leakage.

No material waste.

Completely sealed chassis.

Material bin sight glasses.

Material bin finger guards.

Machine mount with manual slide gate discharge.

Remote/bin mount with pneumatic slide gate discharge.

Calibration to ISO standards.

RAL 9003 paint.

Chemical resistant touch screen.

Simple and quick cleanout.

Options (click here to hide)

Loading control option.

Floor stand.

TB reports.

Material level alarm control.

Drain chute.

Air blow-off for mix chamber level sensor.

Remote mixer demand sensor.

Remote HMI operator cable.

Stainless steel wetted surfaces.

Specifications (click here to hide)
Side View Front View
Control Top View




Performance characteristics
Batch size lbs {g} 1.0 {450}
Maximum throughput rate lb/hr {kg/hr}   175 {79}
Bin capacity - main ingredient ft³ {liter} 0.2 {5.7}
Bin capacity - minor ingredient ft³ {liter} 0.2 {5.7}
Maximum number of materials 4
Number of vertical discharge valves 4
Number/(size) of major bin valves 2 - (40 mm)
Number/(size) of minor bin valves 2 - (20 mm)
Dimensions inches {mm}
A - Height above mounting plate 32.50 {825.5}
B - Hopper width and depth (square) 25.00 {635}
C - Overall depth 27.00 {686}
D - Control height 6.50 {165.1}
E - Control width 8.75 {222.3}
F - Control depth 6.75 {171.5}
G - Loader center distance 12.75 {323.9}
H - Loader center distance 12.91 {327.9}
Weight lbs {kg}
Installed  75 {34}
Shipping  125 {57}
Voltage total amps 
115V/1 phase/60 hz 1.0
230V/1 phase/50 hz 0.5
Compressed air requirements
Discharge valves 90 psi @ 0.2 ft³/min {6 bars @ 0.09 liters/sec};1/4 in. NPT fitting
Maximum loader sizes 
8 inch loaders Number of loaders - 4