MedLine ResinWorks

MedLine ResinWorks

 

 

Conair MedLine® ResinWorksTM systems offer a new level of manufacturing efficiency. By consolidating resin handling and pre-conditioning into a central area, material changes can take place quickly. Simplified resin dehumidification is the heart of the ResinWorks system, where multiple hoppers are supplied on a common, pre-plumbed, pre-wired sled, and connected to a dehumidifying dryer to provide superior drying and maximum productivity. Individual sleds can be connected to form an efficient, centralized resin drying area supplying large numbers of processing machines with a wide array of dried resins.

  • Quick clean hoppers
  • Superior mass flow
  • 100% insulated
  • Long life tube heaters
  • Super safe hopper control
  • Automatic airflow balancing
  1. Downloads
  2. Videos
  3. Contact Us

Contact Us Form

Click here

email

info@conairgroup.com

Phone

+1 724 584 5500

Parts & Service

+1 800 458 1960 - United States

+1 814 437 6861 - International

parts@conairgroup.com

service@conairgroup.com

Options (click here to hide)

Multiple Sled Connection Kit.

Adjustable Purge Valve.

Hopper Discharge Drain Port.

Precision Slide Gate.

Communications.

Temperature Setback RTD.

Specifications (click here to hide)
Multi-Hopper Sled

Single-Hopper Sled
Model RWH14-3 RWH18-6 RWH24-12 RWH24-18 RWH33-21 RWH33-28 RWH39-35 RWH39-42 RWH44-58
Performance characteristics
Volume  ft³ {liter} 3.0 {85.0} 6.0 {170.0} 12.0 {340.0} 18.0 {509.0} 21.0 {595.0} 28.0 {793.0} 35.0 {991.0} 42.0 {1189.0} 58.0 {1643.0}
Capacity @ 35 lb/ft³  lb {kg} 105 {48.0} 210 {95.0} 420 {191.0} 630 {286.0} 735 {333.0} 980 {445.0} 1225 {556.0} 1470 {667.0} 2030 {921.0}
Capacity @ 52 lb/ft³  lb {kg} 156 {71.0} 312 {142.0} 624 {283.0} 936 {425.0} 1092 {495.0} 1456 {660.0} 1820 {826.0} 2184 {991.0} 3016 {1368.0}
Air inlet/outlet  OD  inches {mm} 2.5 {64.0} 2.5 {64.0} 2.5 {64.0} 2.5 {64.0} 5.0 {127.0} 5.0 {127.0} 5.0 {127.0} 5.0 {127.0} 5.0 {127.0}
Inside diameter  OD  inches {mm} 14.0 {365.0} 18.0 {457.0} 24.0 {610.0} 24.0 {610.0} 33.0 {838.0} 33.0 {838.0} 39.0 {991.0} 39.0 {991.0} 44.0 {1117.6}
Material inlet  IT06 IT07 IT07 IT07 IT07 IT07 IT07 IT07 IT07
Material outlet ID inches {mm} 2.38 {60.3} 2.38 {60.3} 2.38 {60.3} 2.38 {60.3} 2.38 {60.3} 2.38 {60.3} 3.0 {76.0} 3.0 {76.0} 3.0 {76.0}
Material discharge (bottom) IB02 IB02 IB02 IB02 IB02 IB02 IB03 IB03 IB03
Voltages  full load  amps
Heater  kW  4    10    30   
208 V/3 phase/60 Hz  11.4  11.4  21.2  21.2  21.2  21.2  N/A  N/A  N/A 
230 V/3 phase/60 Hz 10.3  10.3  25.3  25.3  25.3  25.3  N/A  N/A  N/A 
400 V/3 phase/50 Hz  5.9  5.9  14.5  14.5  14.5  14.5  43.7  43.7  43.7 
460 V/3 phase/60 Hz  5.1  5.1  12.7  12.7  12.7  12.7  38.0  38.0  38.0 
575 V/3 phase/60 Hz 4.1  4.1  10.2  10.2  10.2  10.2  30.4  30.4  30.4 
Dimensions  inches {cm}          
Standard Sled         
A - Overall height 78.7 {200.0}  86.5 {219.7}  92.6 {235.2}  116.3 {295.4}  107.5 {273.1}  118.5 {300.9}  121.5 {308.0}  132.5 {337.0}  138.5 {352.0} 
B - Height below mounting flange 29.3 {74.0} 25.6 {65.0}  20.6 {52.3}  20.6 {52.3}  24.0 {61.0}  24.0 {61.0}  19.5 {50.0}  19.5 {50.0}  14.5 {37.0} 
C - Panel height  41.3 {104.8}  41.3 {104.8}   41.3 {104.8}  41.3 {104.8}  41.3 {104.8} 41.3 {104.8}  41.8 {106.0}  41.8 {106.0}  41.8 {106.0} 
D - Sled width  25.0 {63.5}  25.0 {63.5}  36.0 {91.4}  36.0 {91.4}  45.0 {114.3}  45.0 {114.3}  69.0 {175.3}  69.0 {175.3}  74.0 {187.9} 
E - Depth 51.3 {130.3} 51.3 {130.3}  51.3 {130.3}  51.3 {130.3}  51.3 {130.3}  51.3 {130.3}  59.0 {150.0}  59.0 {150.0}  64.0 {162.0} 
Approximate weight lb {kg}
Shipping Weight 350{158.7}  450 {204.1}  670 {303.9}  700 {317.5}  1000 {453.5} 1250 {566.9} 1700 {771.1} 1750 {793.7} 2000 {907.1}