Cyclone Dust Collector

cycloneheader.jpg

Cyclone Dust Collector
Dust Collectors

Conair Cyclone Dust Collectors remove up to 90% of the dust before it ever reaches the filter in your filtered dust collectors. Incorporating the Cyclone into your vacuum line greatly reduces the filter maintenance frequency, and filter replacement frequency of your Conair DC1, DC2, or DC3 Dust Collector.
The Cyclone Dust Collector uses the nature of physics to remove dust particles from your line. The cycloning action of the air inside the carbon steel cyclone drops the dust particles into the dust collection canister. No power or compressed air are required.*
Service consists of periodic emptying of the dust canister.

 

* 120 V power and compressed air are required for the Auto-dump option.

  • Quick installation into new or existing systems
  • Simple to maintain
  1. Downloads
  2. Videos
  3. Contact Us

Contact Us Form

Click here

email

info@conairgroup.com

Phone

+1 724 584 5500

Parts & Service

+1 800 458 1960 - United States

+1 814 437 6861 - International

parts@conairgroup.com

service@conairgroup.com

Specifications (click here to hide)

Model Cyclone
Performance Characteristics
Pump size range   Hp {kW} 5-25 {3.7-18.7}
Vacuum line size OD  inches {mm}

1.75, 2.00, 2.25, 2.50, 3.00, 4.00 {44.45, 50.80, 57.15, 63.50, 76.20, 101.60}

Maximum collection capacity  ft³ {liters} 1.1 {31.1}
Recommended Dust collection  ft³ {liters} 0.75 {21.2}
Dimensions  inches {mm}
A - Overall Height 68.3 {1734.8}
B - Inlet tube height 60.5 {1536.7}
C- Width 14.0 {355.6}
D - Depth 24.8 {629.9}
Approximate weight   lb {kg}
Installed 130 {59}
Shipping 200 {91}
Voltage    Full load amps (Applies only to Cyclone Dust Collector with auto-dump option)
120V/1 phase/60Hz 1.0
Compressed air requirement   (Applies only to Cyclone Dust Collector with auto-dump option)
  80 - 120 psi {5.5 - 8.3 bars}