DeDuster C-50

DeDuster C-50

 

The Conair DeDuster® C-50 is a throat-mounted dust control separator that removes dust, angel hair and streamers from material just before it enters production. Conair’s patented DeDuster is perfect for applications with throughputs up to 50 lbs/hr where processors have problems with black spots or weak spots in parts due to dust and streamers. The DeDuster removes these problems at the throat which results in reduced scrap rates, higher quality parts, and increased profit.

Easy-to-use with a simple on/off switch, feeder speed knob and a clear dust container. The see-through container allows for visual confirmation that streamers and dust are being removed from the resin just before the injection mold machine or extruder. The dust container is easily removed and emptied by hand, without any tools, in less than ten seconds.

  • Ideal for medical applications.
  • Compact size for easy retrofitting, and lower stack height.
  • Low cost, high benefit investment.
  • Performance you can see.
  1. Downloads
  2. Videos
  3. Contact Us

Contact Us Form

Click here

email

info@conairgroup.com

Phone

+1 724 584 5500

Parts & Service

+1 800 458 1960 - United States

+1 814 437 6861 - International

parts@conairgroup.com

service@conairgroup.com

Features (click here to hide)

Material inlet.

Compressed air supply.

Power connection (110/220 volt).

No tools access window.

Dirty air path.

Dust collection container.

Specifications (click here to hide)

Model C-50
Flow rate (pellet throughput)
  50 lbs/hr {20 kg/hr} at 30 lbs/ft3 density
  70 lbs/hr {30 kg/hr} at higher bulk densities
Dimensions  inches {mm}
A - Overall height 11.2 {284}
B - Body height 10.3 {260}
C - Width 14.9 {378}
D - Overall depth 11.0 {279}
E - Filter housing width 4.9 {124}
F - Material inlet 4.3 {109}
G - Bolt pattern (square) 5.3 {135}
H - Body depth 6.0 {152}
I - Through holes 0.4 x 0.2 {10 x 5}
J - Inlet center line to filter housing 6.5 {165}
K - Material outlet (square) 1.3 x 1.1 {33 x 29}
Approximate weight lb {kg}
Installed weight 26 {12}
Shipping weight 37 {17}
Available voltages - Approximate full load amps
110 VAC 0.50
220 VAC 0.25
Compressed air requirements
  2-3 CFM {3.4 - 5 m3/hr} at 20-30 psi {1.5-2 bar}