FL Filterless Receiver

FL Filterless Receiver
Vacuum Material Receivers

Pellets.  Virgin-regind mixes.  Dusty, problem materials.  Course powders.  Conair FilterLess vacuum receivers can handle the job. 

The FilterLess vacuum has the ability to convey dusty materials and free-flowing powder larger than 100 microns in diameter.  Each FilterLess receiver has a patented "filterless insert" that uses continuous reversal of vacuum air to separate incoming material from conveying air without filters or screens.  The process provides dramatic air/material separation without relying on filtration.

  • Choice of discharge
  • Thick-wall, steel construction
  • Built-in vacuum sequencing valve
  • Choice of control
  • Simple, no-tools clean out
  1. Downloads
  2. Videos
  3. Contact Us

Specifications Sheet

 

Current Manual

English

Contact Us Form

Click here

email

info@conairgroup.com

Phone

+1 724 584 5500

Parts & Service

+1 800 458 1960 - United States

+1 814 437 6861 - International

parts@conairgroup.com

service@conairgroup.com

Specifications (click here to hide)
Hopper Loading Direct Feed
Gravity Discharge Positive Discharge
Receiver model FL10 FL15 FL20 FL24
Receiver diameter  inches {mm} 10 {254} 15 {381} 20 {508} 24 {610}
Receiver volume  ft³ {liters) 0.28 {7.9} 1 {28.3} 2.3 {65.1} 4 {113.3}
Material/Vacuum line size range  inches {mm} 1.5-2 {38-51} 1.5-2.5 {38-64} 2.25-3 {57-76} 2.5-4 {64-102}
Receiver maximum temperature rating °F{°C} 180{82}
with high-heat option °F{°C} 350 {177}
Available voltages (outputs) 120 VAC, 24 VAC and 24 VDC
Compressed air requirements Intermittent duty: 1 ft³/min. @ 80 psi {28.3 liters/min. @ 5.51 bars}
Compressed air NPT fitting: 3/8 inches
Hopper Loading Configuration
Receiver model FL10 FL15 FL20 FL24
Dimensions  inches {mm}
A - Height above mounting plate 20.5 {521} 32.75 {832} 45.25 {1150} 57.0 {1450}
B - Depth below mounting plate 8.375 {213} 8.375 {213} 9.5 {241} 9.5 {241}
        with positive discharge 16.0 {406} 16.0 {406} 16.0 {406} 16.0 {406}
C - Height to center of material inlet 10.5 {267} 21.25 {540} 28.5 {724} 37.0 {940}
D - Height to center of vacuum outlet 19.25 {489} 30.5 {775} 42.5 {1080} 52.5 {1334}
Weight  lb {kg}
Installed 40 {18} 58 {26} 92 {42} 126 {57}
Shipping 120 {54} 170 {77} 200 {91} 260 {118}
Direct Feed Configuration (glass hopper)
Receiver model FL10 FL15
Viewing chamber model 4 lb 15 lb 25 lb 4 lb 15 lb 25 lb
Viewing chamber capacity  lb {kg} 4 {1.81} 15 {6.8} 25 {11.3} 4 {1.81} 15 {6.8} 25 {11.3}
        with isolator valve 3 {1.36} 11 {4.98} 21 {9.52} 3 {1.36} 11 {4.98} 21 {9.52}
Dimensions  inches {mm}
A - Height above mounting plate 32.3 {820.4} 37.8 {960.1} 49.8 {1265} 44.5 {1130} 50.0 {1270} 62.0 {1575}
B - Height to center of material inlet 20.9 {530.9} 28.3 {718.8} 40.3 {1024} 31.7 {805.2} 39.1 {993.1} 51.1 {1298}
C - Height to center of vacuum outlet 29.7 {754.4} 37.1 {942.3} 49.1 {1247} 40.9 {1038.9} 48.3 {1226.8} 60.3 {1532}
        add for isolator valve 2.25 {57}
Weight  lb {kg}
Installed 40 {18} 55 {25} 113 {51} 58 {26} 85 {39} 143 {65}
Shipping 68 {31} 83 {38} 143 {65} 90 {41} 119 {54} 179 {81}