MG Series Drawer Magnets

MG Series Drawer Magnets
Flange Mounted Drawer Magnets

There is no substitute for the elimination of tramp metal from your process stream. Damaged screws, molds or dies, plugged gates and clogged filter packs stop productivity and often lead to costly process equipment downtime and expensive repairs. A drawer magnet provides the single best investment your process can make in protection against metal contamination
and the damage it can cause. Drawer magnets provide a filter of magnetic power to draw ferrous metals out of the material stream, collect them and allow them to be safely removed from the process stream.

The Conair MG Series drawer magnets are capable of separating ferrous metals too small to be visible, for the utmost in protection.

  • Superior contaminant capture
  • Stack-up strength
  • Easy cleaning
  1. Downloads
  2. Videos
  3. Contact Us

Contact Us Form

Click here

email

info@conairgroup.com

Phone

+1 724 584 5500

Parts & Service

+1 800 458 1960 - United States

+1 814 437 6861 - International

parts@conairgroup.com

service@conairgroup.com

Options (click here to hide)

Self-cleaning magnets.

Material shut-off gate above magnet drawer.

Vacuum tight magnet drawer for direct feed loaders.

High temperature gaskets.

Purge spout.

Drain port.

Liquid colorant dispensing port.

 

Specifications (click here to hide)

 

 

 

 

   
 Front view Top view  Bottom view 
Models MG1 MG2 MG3 MG4
Dimensions   inches {mm}    

A - Standard housing height

10.500 {267} 10.625 {270} 10.875 {276}  12.875 {327}
Standard housing height with slide gate 10.500 {267} 10.625 {270} 10.875 {276}  12.875 {327}
Low profile housing height N/A 5.688 {144} 5.938 {151}  7.500 {191}
Low housing height with slide gate N/A 5.688 {144} 5.938 {151}  7.500 {191}
B - Top mounting plate size (sq.)  4 {102} 6 {152}  8 {203}  10 {254} 
C - Top mounting plate bolt pattern (sq.)  3 {76} 5 {127}  7 {178}  8 {203} 
D - Top mounting bolt thread size 3/8-16  1/2-13 
E - Top material hole diameter  2 {51} 3 {76}  5 {127}  6 {152}
F - Bottom plate size (sq.)  4 {102} 6 {152}   8 {203} 10 {254} 
G - Bottom mounting plate bolt pattern (sq.)  3 {76}  5 {127}  7 {178} 8 {203} 
H - Bottom mounting bolt hole size  7/16 {11}  9/16 {14}
I - Bottom material hole diameter  1.875 {48} 2.875 {73}  4.875 {124}  5.875 {149}