Powder Loader (PM) Series

Powder Loader (PM) Series



The PM series effectively transfers even the toughest filled powders down to 1 micron in size. Available in a range of sizes, the PM series uses a pleated filter assembly and a self-cleaning blowback system.

 

The PM series can facilitate a wide range of throughputs using the rugged design of Conair's time-tested DustBeater series, and the same powerful vacuum motors used on Conair's most popular loaders.

 

  • Compact to work in limited space
  • A range of sizes and options
  • Built-in vacuum motor and control system
  • Easy material change and cleaning
  • Long filter life with minimal dust
  1. Downloads
  2. Videos
  3. Contact Us

Contact Us Form

Click here

email

info@conairgroup.com

Phone

+1 724 584 5500

Parts & Service

+1 800 458 1960 - United States

+1 814 437 6861 - International

parts@conairgroup.com

service@conairgroup.com

Options (click here to hide)

Stainless steel construction.

Differential pressure gague.

Positive discharge valve.

Wear plates.

Filter vent assembly.

Specifications (click here to hide)
Model PM8 PM12 PM12
(brushless)
PM15 PM15
(brushless)
Performance characteristics
Vacuum motor 0.625 HP
2-brush
0.875 HP
4-brush
1.3 HP
brushless
0.875 HP
4-brush
1.3 HP
brushless
Maximum throughput lbs/hr {kg/hr} 200 {91} 450 {204} 750 {340} 550 {249} 1000 {454}
Maximum conveying distance ft {m} 50 {15.24} 50 {15.24} 50 {15.24} 50 {15.24} 50 {15.24}
Loader maximum temperature °F{°C} 180 {82} 180 {82} 150 {66} 180 {82} 150 {66}
Receiver volume  ft³ {liters} 0.14 {4.0} 0.5 {14.2} 0.5 {14.2} 1.0 {28.3} 1.0 {28.3}
Air to cloth ratio  cfm:ft² 3:1 3:1 3:1 3:1 3:1
Vacuum/material line sizes  inches {mm} 1.5 - 2.0 {38 - 51} 1.75-2.0 {45-51} 1.75-2.0 {45-51} 1.75-2.0 {45-51} 1.75-2.0 {45-51}
Electrical Requirements

120 VAC @ 8 amps

220 VAC @ 4 amps

120 VAC @ 14 amps

220 VAC @ 7 amps

120 VAC @ 17 amps

120 VAC @ 14 amps

220 VAC @ 7 amps

120 VAC @ 17 amps
Dimensions  inches {mm}
Hopper diameter 8.0 {203} 12.0 {305} 12.0 {305} 15.0 {381} 15.0 {381}
A - Height above mounting plate 44.9375 {1141.4} 52.3125 {1328.7} 52.3125 {1328.7} 55.75 {1416.1} 55.75 {1416.1}
B - Depth below mounting plate 5.5 {140} 8.375 {213} 8.375 {213} 8.375 {213} 8.375 {213}
        with positive discharge N/A 16.0 {406} 16.0 {406} 16.0 {406} 16.0 {406}
C - Clearance hole diameter 6.63 {167} 12.0 {305} 12.0 {305} 12.0 {305} 12.0 {305}
D - Height to center of material inlet 6.19 {157} 9.5 {241} 9.5 {241} 12.1875 {309.6} 12.1875 {309.6}
Weight  lb {kg}
Installed 49.0 {22.2} 77.0 {34.9} 77.0 {34.9} 143.0 {64.9} 143.0 {64.9}
Shipping 144.0 {65.3} 172.0 {78.0} 172.0 {78.0} 238.0 {107.9} 238.0 {107.9}
Compressed air requirements  (intermittent duty)
Pressure 60-80 psi {4.1 - 5.5 bars} 60-80 psi {4.1 - 5.5 bars} 60-80 psi {4.1 - 5.5 bars} 60-80 psi {4.1 - 5.5 bars} 60-80 psi {4.1 - 5.5 bars}
Consumption 2 ft³/min. @ 80 psi {0.94 liters/sec. @ 6 bars} 8 ft³/min. @ 80 psi {3.7 liters/sec. @ 6 bars} 8 ft³/min. @ 80 psi {3.7 liters/sec. @ 6 bars} 8 ft³/min. @ 80 psi {3.7 liters/sec. @ 6 bars} 8 ft³/min. @ 80 psi {3.7 liters/sec. @ 6 bars}
NPT Fitting 3/8 inch 3/8 inch 3/8 inch 3/8 inch 3/8 inch
Filter
Filter type one pleated polyester cartridge one pleated polyester cartridge one pleated polyester cartridge two pleated polyester cartridges two pleated polyester cartridges
Total filter area 23 ft² {2.1 m²} 56 ft² {5.2 m²} 56 ft² {5.2 m²} 48 ft² {4.5 m²} 48 ft² {4.5 m²}