Thermolator TW-V Series

Thermolator TW-V Series

 

 

The Thermolator TW-V Series liquid temperature controller is designed to maintain the process temperatures by circulating cooling tower or chiller water. Internal heaters provide rapid pre-heating of molds and dies.

All models offer Incoloy heaters, silicon carbide pump seals; pressure gauges; easy-to-use microprocessor controls and tool-free access panels for fast removal. We offer an option for process line purge.

  • Clear, accurate, easy to use
  • Energy savings
  • Higher-efficiency pumps
  • Incoloy heaters
  • "Casters up" warranty
  1. Downloads
  2. Videos
  3. Contact Us

Contact Us Form

Click here

email

info@conairgroup.com

Phone

+1 724 584 5500

Parts & Service

+1 800 458 1960 - United States

+1 814 437 6861 - International

parts@conairgroup.com

service@conairgroup.com

Features (click here to hide)

Built-in pressure gauges.

Incoloy heaters.

High efficiency pumps.

Built-in sediment trap.

Options (click here to hide)

Compressed air purge valve.

Stacking rack.

Specifications (click here to hide)
PERFORMANCE CHARACTERISTICS
Models TW-V
Minimum setpoint temperature °F {°C} 40 {4}
Maximum setpoint temperature °F {°C} 250 {121}
Minimum operating temperature °F {°C} Approximately 20° {11°} above the cooling water inlet temperature
Standard cooling valve size inches {mm} Cv 3/8 {9.5} Cv 0.5 for 0.75Hp, 1/2 {12.7} Cv 2.5 for 2 Hp
Available pump sizes 0.75, 2 Hp {0.56, 1.49 kW}
Connections to/from process NPT (female) 1.50 inches
Connections in/out cooling water NPT (female) 1.0 inches
Available heater sizes 12 kW
PUMP PERFORMANCE - Consult your Conair representative for pump performance characteristics at other operating points.
Pump 3/4 Hp {0.56 kW} 2 Hp {1.49 kW}
Nominal flow gpm {lpm} 50 {189} 75 {284}
Pressure@ nominal flow psi {kg/cm²} 20 {1.4} 30 {2.1}
DIMENSIONS in. {mm}
Standard cabinet, not including any connections
Height 28.4 {721.0}
Width 14.0 {355.6}
Depth 25.8 {655.3}
SHIPPING WEIGHT RANGES lb {kg} Weights vary depending on options.
  Single Zone
Pump Min Max
0.75 Hp {0.56 kW} 240 {109} 325 {147}
2 Hp {1.49 kW} 250 {113} 338 {153}
TOTAL FULL LOAD AMPS PER ZONE
Heater 12 kW
Voltage  208/3/60 230/3/60 380/3/60 400/3/50 460/3/60 575/3/60
Pump  Hp {kW}
0.75 {0.56} 33.4 33.4 19.3 19.6 16.7 13.5
2.0 {1.49} 36.4 36.4 20.9 22.3 18.1 14.6