K Loaders
Vacuum Material Receivers
K Loaders provide a compact material receiver for direct-to-machine mounting that eliminates an inventory of material over the machine throat.
Only the material needed for one or two shots of processing are transferred, so materials will not regain moisture after drying. There's also less material to drain, so material changes are faster.
- Modular components
- Abrasion free material flow
- Compatible with your process
- See your material flow
Contact Us Form
Phone
+1 724 584 5500
Parts & Service
+1 800 458 1960 - United States
+1 814 437 6861 - International
Features
(click here to hide)
Easy disassembly for fast cleanout
Small receiver, yet maximum filter area
| Front view | Optional isolator valve |
|
|
 |
| mounting plates | |
 |
|
| Models | K2 | K2CR | ||
| Viewing Chamber Selection | Small (8 oz.) | Large (33 oz.) | Small (8 oz.) | Large (33 oz.) |
| Performance characteristics | ||||
| Receiver volume ft³ {liters} | .009 {0.25} | .14 {3.96} | .009 {0.25} | .14 {3.96} |
| Receiver capacity lb {kg} | 3.2 {1.5} | 4.75 {2.2} | 3.2 {1.5} | 4.75 {2.2} |
| Material/ vacuum line size OD inches {mm} | 1.5 2 {38.1 - 50.8} | |||
| Dimensions inches {mm} | ||||
| A - Height with viewing chamber | 19 {482.6} | 25 {635.0} | 19 {482.6} | 25 {635.0} |
| B - Height to center of material inlet | ||||
| with straight inlet | 23.5 {596.9} | 29.5 {749.3} | 23.5 {596.9} | 29.5 {749.3} |
| with 45 inlet | 25.5 {647.7} | 31.5 {800.1} | 25.5 {647.7} | 31.5 {800.1} |
| with 90 inlet | 25.5 {647.7} | 31.5 {800.1} | 25.5 {647.7} | 31.5 {800.1} |
| C - Height to center of vacuum outlet | 16.5 {419.1} | 22.5 {571.5} | 16.5 {419.1} | 22.5 {571.5} |
| D - Hopper diameter | 7.5 {190.5} | 7.5 {190.5} | 7.5 {190.5} | 7.5 {190.5} |
| Weight lb {kg} | ||||
| Installed | 10.5 {4.8} | 14 {6.4} | 9 {4.1} | 13 {5.9} |
| Shipping | 14 {6.4} | 21 {9.5} | 12 {5.4} | 20 {9.0} |
| Filter Type | 20 mesh stainless steel screen cylinder | |||
| Standard construction material | carbon steel | carbon steel | stainless steel | stainless steel |
| Compressed air requirement | 80 - 120 psi {5.5 - 8.3 bars} | |||
Find your local Conair representative
Follow us on:
