CP Series Cleated Puller
Cleated Pullers
The CP series cleated pullers are designed and built for the demanding profile extrusion industry.
Every CP puller has an easy-to-use operator interface, maximum pull torque, low maintenance requirements and flexible operation.
This series of pullers is designed for large, general profile applications such as decking and window lineals.
Products » Downstream Extrusion » CP Series Cleated Puller
- Consistent, accurate pulling
- Dependable
- Flexible and efficient
- Heavy-duty design
Contact Us Form
Phone
+1 724 584 5500
Parts & Service
+1 800 458 1960 - United States
+1 814 437 6861 - International
| Front View | Side View |
 |
 |
| Models | CP640 | CP650 | CP850 | CP880 |
| Performance characteristics | ||||
| Applications | Tube/Profile | Tube/Profile | Profile | Profile |
| Capacity in. {mm} | 6x6 {152x152} | 6x6 {152x152} | 8x8 {203x203} | 8x8 {203x203} |
| Cleat width in {mm} | 3 {76.2} | 3 {76.2} | 8 {203} | 8 {203} |
| Cleat contact length in. {mm} | 40 {1016} | 50 {1270} | 50 {1270} | 80 {2032} |
| Maximum feed opening in. {mm} | 6 {152.4} | 6 {152.4} | 8 {203.2} | 8 {203.2} |
| Pull force lbs/kg | 1700 {771} | 1700 {771} | 2500 {1134} | 2500 {1134} |
| Drive motor | (2) 2 Hp | (2) 2 Hp | (2) 2 Hp | (2) 2 Hp |
| Belt speed ranges ft/min {m/min} | ||||
| 1-10 {0.3-3} | ||||
| 2-20 {0.6-6.1} | ||||
| 3-30 {0.9-9.1} | ||||
| 4-40 {1.2-12.2} | ||||
| 5-50 {1.5-15.2} | ||||
| Cleat assemblies | ||||
| Cleat type | Caterpillar-type traction assembly with 65 durometer non-marking cleats | |||
| Cleat style | Bolt-on | |||
| Cleat height inch {mm} | 1 {25.4} | |||
| Dimensions inch {mm} | ||||
| A-Height | 73 {1854} | 74 {1880} | 84 {2133} | 84 {2133} |
| B-Length | 69 {1752} | 79 {2006} | 120 {3048} | 150 {3810} |
| C-Width | 38 {990} | 38 {990} | 38 {990} | 38 {990} |
| D-Centerline Height ± 3 {76.2} | 42 {1067} | 42 {1067} | 42 {1067} | 42 {1067} |
| Weight lb {kg} | ||||
| Installed | 2400 {1088} | 2500 {1134} | 2500 {1134} | 2700 {1225} |
| Shipping | 2700 {1225} | 2900 {1315} | 3100 {1406} | 3600 {1633} |
| Electrical requirements full load amps | ||||
| 230V/3 phase/60 Hz | 22.2 | 22.2 | 25.6 | 25.6 |
| 460V/3 phase/60 Hz | 14.1 | 14.1 | 19.3 | 19.3 |
| Models | CP10100 | CP10120 | CP1250 | CP1280 |
| Performance characteristics | ||||
| Applications | Profile | Profile | Profile | Profile |
| Capacity in. {mm} | 8x10 {203x254} | 8x10 {203x254} | 8x10 {203x254} | 8x12 {203x304} |
| Cleat width in {mm} | 10 {254} | 10 {254} | 12 {305} | 12 {305} |
| Cleat contact length in. {mm} | 100 {2540} | 120 {3048} | 50 {1270} | 80 {2032} |
| Maximum feed opening in. {mm} | 8 {203.2} | 8 {203.2} | 8 {203.2} | 8 {203.2} |
| Pull force lbs/kg | 2500 {1134} | 2500 {1134} | 2500 {1134} | 2500 {1134} |
| Drive motor | (2) 5 Hp | (2) 5 Hp | (2) 3 Hp | (2) 5 Hp |
| Belt speed ranges ft/min {m/min} | ||||
| 1-10 {0.3-3} | ||||
| 2-20 {0.6-6.1} | ||||
| 3-30 {0.9-9.1} | ||||
| 4-40 {1.2-12.2} | ||||
| 5-50 {1.5-15.2} | ||||
| Cleat assemblies | ||||
| Cleat type | Caterpillar-type traction assembly with 65 durometer non-marking cleats | |||
| Cleat style | Bolt-on | |||
| Cleat height inch {mm} | 1 {25.4} | |||
| Dimensions inch {mm} | ||||
| A-Height | 84 {2133} | 110 {2794} | 101 {2794} | 54 {1371} |
| B-Length | 183 {4648} | 203 {5156} | 68 {1727} | 98 {2489} |
| C-Width | 38 {990} | 38 {990} | 38 {990} | 38 {990} |
| D-Centerline Height ± 1 {} | 42 {1067} | 42 {1067} | 42 {1067} | 42 {1067} |
| Weight lb {kg} | ||||
| Installed | 3200 {1451} | 3500 {1587} | 2700 {1224} | 3000 {1360} |
| Shipping | 4600 {2086} | 5000 {2268} | 3500 {1067} | 3800 {1724} |
| Electrical requirements full load amps | ||||
| 230V/3 phase/60 Hz | 25.6 | 25.6 | 25.6 | 25.6 |
| 460V/3 phase/60 Hz | 19.3 | 19.3 | 19.3 | 19.3 |
| Models | CP6360 | CP12460 | CP8660 | CP24660 |
| Performance characteristics | ||||
| Applications | Pipe | Profile | Profile | Profile |
| Capacity in. {mm} | 6 dia. {152} | 12 dia. {305} | 18 dia. {457} | 24 dia. {610} |
| Cleat width in {mm} | 1 {25} | 3 {76.2} | 3 {76.2} | 3 {76.2} |
| Cleat contact length in. {mm} | 60 {1524} | 60 {1524} | 60 {1524} | 60 {1524} |
| Maximum feed opening in. {mm} | 6.5 {165.1} | 13.2 {335.3} | 19.5 {495.3} | 25.8 {655.3} |
| Pull force lbs/kg | 2500 {1134} | 2500 {1134} | 2500 {1134} | 2500 {1134} |
| Drive motor | (2) 2 Hp | (2) 2 Hp | (2) 2 Hp | (2) 2 Hp |
| Belt speed ranges ft/min {m/min} | ||||
| 1-10 {0.3-3} | ||||
| 2-20 {0.6-6.1} | ||||
| 3-30 {0.9-9.1} | ||||
| 4-40 {1.2-12.2} | ||||
| 5-50 {1.5-15.2} | ||||
| Cleat assemblies | ||||
| Cleat type | Caterpillar-type traction assembly with 65 durometer non-marking cleats | |||
| Cleat style | Molded | Bolt-on | ||
| Cleat height inch {mm} | 1 {25.4} | |||
| Dimensions inch {mm} | ||||
| A-Height | 84 {2133} | 84 {2133} | 84 {2133} | 84 {2133} |
| B-Length | 109.6 {2783} | 109.6 {2783} | 109.6 {2783} | 109.6 {2783} |
| C-Width | 38 {990} | 77 {1956} | 87 {2028} | 97 {2462} |
| D-Centerline Height ± 1 {} | 42 {1067} | 42 {1067} | 42 {1067} | 42 {1067} |
| Weight lb {kg} | ||||
| Installed | 2900 {1315} | Consult Conair | Consult Conair | Consult conair |
| Shipping | 4500 {2041} | 6500 {2948} | 7500 {3402} | 8500 {3856} |
| Electrical requirements full load amps | ||||
| 230V/3 phase/60 Hz | 25.6 | Consult Conair | ||
| 460V/3 phase/60 Hz | 19.3 | |||
Find your local Conair representative
Follow us on:
