- Contact Us
- NPE 2012
- Shop
- Knowledge Center
- Industries Served
- Support
- Products
- Material Storage
- Conveying
- Tube Loader (TLM)
- Access™ (AL) Loaders
- DustBeater (DB) Series
- Tube Loader (TLA)
- CAML-EVB Evacuation System
- CAML-EVG Evacuation System
- Access™ (AR) Receivers
- Duraload (DL) Series
- Tube Loader (TLR)
- FL Filterless Receiver
- Powder Loader (PL)
- FLX Loading Control
- ELC Series Controls
- B32 Loading Control
- ILS Loading Control
- ControlWorks™
- RG Vacuum Pumps
- PD Pumps
- Dust Collectors (DC)
- Adjustable Purge Valve
- Common Line Valves
- Ratio Valve
- Purge Valves
- Vacuum Railcar Unloading
- Resin Selection Station
- Selector Plates
- Access™ (JIT) Hopper
- Bulk Distribution Boxes
- K Loaders
- Handy Hopper
- Minature Handy Hopper
- Audible/visual alarm and alarm kits
- Drying
- MDCW (15-100)
- W Dryers (15-100)
- MDCW (150-200)
- W Dryers (150-400)
- W Dryers (600-5000)
- EnergySmart™ Dryer (ES-1)
- EnergySmart™ System (ES-2)
- SlimLine (SL) Dryer
- Hot Air Dryer (HAD)
- HTC Temperature Controller
- GasTrac Process Air Heater
- CH Hoppers
- ResinWorks™ System
- CR Crystallizer
- DM-II Drying Monitor
- Floor Stand (FS)
- Blending
- TrueBlend™ TB45
- TrueBlend™ TB100
- TrueBlend™ TB250
- TrueBlend™ TB250R
- TrueBlend™ TB500
- TrueBlend™ TB900
- TrueBlend™ TB1800
- TrueBlend™ TB2500
- TrueBlend™ TB3500
- TrueBlend™ High Heat
- TrueBlend™ Reporting
- Level Alarm Control
- WSB/GB Retrofit Control
- Material Mixer
- TBBS Models
- TrueBlend EXT
- TrueWeigh Continuous Blenders
- Feeding
- Heat Transfer
- Thermolator® Microtemp
- Thermolator® (TW) Series
- Thermolator® (TW-CD)
- Thermolator® vacuTrac
- Thermolator® heaTrac
- TW-HT Series
- TW-HTM Series
- TW-ALT Series
- Chiller, EarthSmart™ (ECM)
- Chiller, EarthSmart™ (ECA)
- Chiller, EarthSmart™ (ECW)
- Chiller, Air (22-136)
- Chiller, Air (156SK - 527SK)
- Chiller, Water (86SK -163SK)
- Chiller, Water (205SK -481SK)
- Tower Isolation (PF) Series
- Cooling Tower (E1)
- Cooling Tower (E2)
- Cooling Tower (E3)
- Cooling Tower (E4)
- Pump Tank, Polymer
- Pump Tanks, Steel
- CFS Strainers
- SMF Filter Systems
- Granulation
- Upstream Extrusion
- Downstream Extrusion
- Parts
- About Us
DT Series
Dump Tables
Conair's DT series dump table consistently gathers pipe, rigid tubing and custom profiles and stores them for easy removal. This system reduces material hang-up points and helps to preserve end-product quality.
An automated dump sequence tilts the primary collection table to deliver product to the secondary collection tray for subsequent processing or packaging.
Products » Downstream Extrusion » DT Series
- Simle-to-use operation
- Reduced maintenance
- Available in a variety of size ranges
Contact Us Form
Phone
+1 724 584 5500
Parts & Service
+1 800 458 1960 - United States
+1 814 437 6861 - International
| Front View | Side View |
 |
 |
| Models | DT12-12 | DT16-12 | DT20-12 | DTV-20-6 |
| Dimensions in. {mm} | ||||
| A-Height | 65 {1651} | 65 {1651} | 65 {1651} | 65 {1651} |
| B-Height to centerline | 39 - 45 {991 - 1143} | 39 - 45 {991 - 1143} | 39 - 45 {991 - 1143} | 39 - 45 {991 - 1143} |
| C-Table width | 12 {305} | 12 {305} | 12 {305} | 6 {152} |
| D-Width | 37.1 {942} | 37.1 {942} | 37.1 {942} | 32.1 {815} |
| E-Length | 156 {3962} | 204 {5182} | 252 {6401} | 252 {6401} |
| Feed direction | Right-to-left | Right-to-left | Right-to-left | Right to left |
| Weight lb {kg} | ||||
| Installed | 800 {363} | 995 {451} | 1400 {635} | 1400 {635} |
| Shipping | 1100 {499} | 1295 {587} | 1780 {870} | 1780 {807} |
| Input Voltage total amps | ||||
| 115V/1 phase/60 Hz | 1 | 1 | 1 | 1 |
| Compressed air requirement | ||||
| Pressure psi {bars} | 60 - 80 {4.14 - 5.52} | 60 - 80 {4.14 - 5.52} | 60 - 80 {4.14 - 5.52} | 60 - 80 {4.14 - 5.52} |
| Consumption ft³/m {liter/sec} | 3 - 5 {1.4 - 2.4} | 3 - 5 {1.4 - 2.4} | 3 - 5 {1.4 - 2.4} | 3 - 5 {1.4 - 2.4} |
| NPT fitting size inch | 3/8 | 3/8 | 3/8 | 3/8 |
Find your local Conair representative
Follow us on:
