Medline Models
Combination Puller/Cutter
Precisely pull and cut small diameter tubing with a puller/cutter unit designed specifically to enhance the production of microbore tubing. This combination puller/cutter is available with two styles of application specific belt pullers.
The cutter portion of the Medline is mounted on stainless steel rails with linear bearings that allow the cutter to be moved front-to-back and side-to-side to increase belt life and promote ease of string-up and coiling.
Products » Downstream Extrusion » Medline Models
- Precise pulling with servo motors
- Eliminate belt slippage
- Visible processing
- Cutting capacity up to 1 inch
- Touch screen control
Contact Us Form
Phone
+1 724 584 5500
Parts & Service
+1 800 458 1960 - United States
+1 814 437 6861 - International
Features
(click here to hide)
- Simple conveyor setup
- Visible cutter head
- Built-in stainless steel particulate/overflow tray
- Stainless steel cabinet
- Optimum eye-level monitoring
- Precisely control belt tension
- Centered, guided material
- Precise pulling
- Safety features including easy-to-reach emergency stop buttons, polycarbonate knife guard, upper and lower clear polycarbonate belt guards, heavy-duty lockdown screws
Options
(click here to hide)
- Independent servo puller motors with precision low backlash planetary gearheads.
- Choice of in-line planetary gear reducer ratios. A reducer ratio of 28:1, 16:1, 7:1 and 5:1 can be selected.
- Remote belt speed control option
- Digital belt gap sensor and readout option
- Optional intuitive taper/bump/bubble software
- 10 inch touch screen control
- Stainless steel cabinet
- Left-to-right puller motion
- Variable blade speed in both demand and flywheel cutting modes
- Scrap mode
- Bushing lubrication system
- Multiple length and batch counts
- Follower cutting mode
- Digital belt gap sensor
- Tapered/bubble control tube/profile software
- 1 inch cut capacity
- Guaging interface
| CPC-1-12/CSC-0.25L Front view | CPC-1-12/CSC-0.25L Side view |
 |
 |
| CPC-3-20/CSC-0.25L Front view | CPC-3-20/CSC-0.25L Side view |
 |
 |
| Models | CPC-1-12/CSC-0.25L | |||
| Performance characteristics | ||||
| Extrudate capacity inches {mm} dia. | 0.5 {12.7} | |||
| Blade drive motor (3000 rpm) CSC cutter Hp {kW} | 2.5 {1.8} | |||
| Servo puller drive motor Hp {kW} | (2) 0.4 {0.3} | |||
| Dimensions inches {mm} | ||||
| A - Height | 71.0 {1803.4} | |||
| B - Height to centerline, ±2 {±50.8} | 42.0 {1067.0} | |||
| C - Width | 40.0 {1016.0} | |||
| D - Depth | 27.0 {685.8} | |||
| Belt width ±3/8 {±9.5} | 1.0 {25.4} | |||
| Feed opening | 2.0 {50.8} | |||
| Reducer ratio/Belt speed | ||||
| 28:1 | 16:1 | 7:1 | 5:1 | |
| Available speeds ft/min. | 1.4 to 140 | 2.5 to 250 | 5.5 to 550 | 10 to 750 |
| Weight lb {kg} | ||||
| Installed | 715.0 {324.0} | |||
| Shipping | 800.0 {363.0} | |||
| Electrical requirements full load amps | ||||
| Drive type (Puller) | Dual servo with precision planetary gearhead | |||
| (2) 0.4 Hp | ||||
| 230V/3 phase/60Hz | 20 | |||
| 460V/3 phase/60Hz | 12 | |||
| Cutter control | Red Lion | |||
| Models | CPC-3-20/CSC-0.25L | ||
| Performance characteristics | |||
| Extrudate capacity inches {mm} dia. | 0.5 {12.7} | ||
| Blade drive motor (3000 rpm) CSC cutter Hp {kW} | 2.7 {2.0} | ||
| Puller drive motor Hp {kW} | 1 {0.8} | ||
| Optional Servo drive motor Hp {kW} | 2.5 {1.8} | ||
| Dimensions inches {mm} | |||
| A - Height | 70.0 {1778} | ||
| B - Height to centerline, ±2 {±50.8} | 41 {1041} | ||
| C - Width | 57.7 {1466} | ||
| D - Depth | 26.0 {660} | ||
| Belt width ±3/8 {±9.5} | 3.0 {76.2} | ||
| Belt traction length | 20.0 {508.0} | ||
| Feed opening | 4.0 {102.0} | ||
| Reducer ratio/Belt speed | |||
| Closed loop vector | |||
| 20:1 | 10:1 | 5:1 | |
| Available speeds ft/min. | 2.6 to 80 | 5.3 to 160 | 10.6 to 320 |
| Weight lb {kg} | |||
| Installed | 735.0 {330.0} | ||
| Shipping | 820.0 {372.0} | ||
| Electrical requirements full load amps | |||
| Drive type (Puller) | Closed loop | Servo | |
| 1.0 Hp | 2.6 Hp | ||
| 230V/3 phase/60Hz | 19.7 | 33.6 | |
| 460V/3 phase/60Hz | 10.5 | 16.8 | |
| Cutter control | Red Lion | ||
Find your local Conair representative
Follow us on:
