CF814S Granulator
Meter Feed Model
The CF814S granulator is ideal for the processor who has small injection molding machines and wants a lot of value without spending a lot of money.
This quiet, energy efficient granulator conserves valuable floor space while producing quality regrind from robot-fed sprues, runners and small parts. This model features a tangential feed cutting chamber; a low-speed motor; and a staggered rotor with replaceable cassette knives.
Products » Granulation » CF814S Granulator
- Low-speed rotor
- Higher throughput, less dust
- No knife resharpening needed
- Safe, full-front access
- Reversible screen
Contact Us Form
Phone
+1 724 584 5500
Parts & Service
+1 800 458 1960 - United States
+1 814 437 6861 - International
Features
(click here to hide)
- No-tools access
- D2 tool steel knives
- No knife adjustment
- Multiple safety interlocks
- Low infeed height
- Scissor-cut action knives
- Solid rotor pulley
- Caster mounted
- Low RPM motor
- Removable flaps
- Tilt-back hopper
- Drop-down screen cradle
|
|
|
| Models | CF814S |
| Performance characteristics | |
| Maximum throughput lb {kg} | up to 200 {90} |
| Cutting chamber in. {mm} | 8 x 14 {200 x 355} |
| Rotor speed rpm | 356 |
| Motor power Hp {kW} | 7.5 {5.6} |
| Screen hole sizes in. {mm} | 532 - 3/16 - 1/4 - 5/16 {4 - 5 - 6 -8 mm} |
| Drive type | Belt |
| Hopper type | Robot feed |
| Vacuum discharge side | Front |
| Rotor | |
| Rotor type | Staggered rotor |
| Cutting circle in. {mm} | 7.88 {200} |
| Knives | |
| Number of rotating knives | 9 (3 x 3) |
| Dimensions in. {mm} | |
| A - Height | 64.5 {1640} |
| B - Width | 31.75 {800} |
| C - Depth | 44.5 {1130} |
| D x E - Hopper opening | 14.25 x 13.5 {360 x 340} |
| Approximate weight lb {kg} | |
| Installed (approximate) | 917 {416} |
| Shipping (approximate) | 960 {435} |
| Voltages Approx. full load amps (Refer to motor nameplate) | |
| 208/3 phase/60 Hz | 24 |
| 230/3 phase/60 Hz | 22 |
| 460/3 phase/60 Hz | 11 |
| 575/3 phase/60 Hz | 9 |
Find your local Conair representative
Follow us on:
