CHS Granulators
Batch-Feed Models
CHS Series of beside-the-machine granulators combine rugged, dependable performance with consistent, high-quality regrind.
The CHS is designed for batch fed parts and runners, and tough applications such as engineered materials and bulky or heavier cross section parts. These units are great for blow molded parts, sheet and film, small pipe, tubing and profile, as well as sprues and runners.
A high-inertia flywheel coupled with the staggered, cassette knife rotor provides higher throughput per hour at lower horsepower.
Products » Granulation » CHS Granulators
- Clean, uniform granules
- Economical, disposable knives
- Easy, no-tools access
- Extended screen life
Contact Us Form
Phone
+1 724 584 5500
Parts & Service
+1 800 458 1960 - United States
+1 814 437 6861 - International
Options
(click here to hide)
- Discharge: manual, vacuum (standard), blower
- Base sound enclosure
- Hardened cutter housing
- Third bed knife
- 3-blade open rotor
- Nitro-carburized screen
| Motor Options •= Standard ο= Optional | ||||
| CHS-810 | CHS-814 | CHS-819 | CHS-824 | |
| 5 Hp {4 kW} | • | N/A | N/A | N/A |
| 7.5 Hp {5.5 kW} | ο | • | • | • |
| 10 Hp {7.5 kW} | ο | ο | ο | ο |
| 15 Hp {11 kW} | ο | ο | ο | ο |
 |
 |
|
CHS standard staggered rotor |
CHS optional open rotor |
 |
 |
| Models | CHS-810 | CHS-814 | CHS-819 | CHS-824 |
| Performance characteristics | ||||
| Throughput lb/hr {kg/hr} | 200 {90} | 250 {115} | 330 {150} | 400 {180} |
| Cutter chamber opening in. {mm} | 8.7 x 9.5 {220 x 240} | 8.7 x 14.2 {220 x 360} | 8.7 x 18.9 {220 x 480} | 8.7 x 23.6 {220 x 600} |
| Rotor speed rpm | 485 | 485 | 485 | 485 |
| Cutting circle in. {mm} | 7.88 {200} | 7.88 {200} | 7.88 {200} | 7.88 {200} |
| Standard motor power Hp {kW} | 5.0 {3.7} | 7.5 {5.5 } | 7.5 {5.5 } | 7.5 {5.5 } |
| Drive type | belt drive | |||
| Hopper type | hand, robot, conveyor - standard (sheet, roll, profile, side feed - optional) | |||
| Vacuum discharge side | front | |||
| Screen mesh sizes | 5/32, 3/16, 1/4, 5/16, 3/8 in. {4, 5, 6, 8, 10 mm} | |||
| Rotor type | staggered rotor - open rotor optional | |||
| Knives | ||||
| Number of rotating knives (knives x segments) | 3X2 | 3X3 | 3X4 | 3X5 |
| Number of bed knives | 2 (optional 3rd) | 2 (optional 3rd) | 2 (optional 3rd) | 2 (optional 3rd) |
| Dimensions inches {mm} | ||||
| A - Height - hopper closed | 58 {1480} | 58 {1480} | 58 {1480} | 58 {1480} |
| B - Height - hopper open | 73 {1856} | 73 {1856} | 73 {1856} | 73 {1856} |
| C - Infeed height - floor to feed tray | 53 {1346} | 53 {1346} | 53 {1346} | 53 {1346} |
| D - Width | 26 {670} | 31 {790} | 36 {910} | 41 {1030} |
| E - Base depth | 35 {890} | 35 {890} | 35 {890} | 35 {890} |
| F - Overall depth | 58 {1482} | 58 {1482} | 58 {1482} | 58 {1482} |
| G - Feed hopper opening - width | 9.5 {240} | 14.0 {360} | 19.0 {480} | 24.0 {600} |
| H - Feed hopper opening - depth | 8.6 {218} | 8.6 {218} | 8.6 {218} | 8.6 {218} |
| Weight lb {kg} | ||||
| Installed | 926 {420} | 1014 {460} | 1157 {525} | 1257 {570} |
| Shipping | 983 {446} | 1058 {480} | 1202 {545} | 1301 {590} |
| Voltages Total amps based on standard motor | ||||
| 208V/3 phase/60 Hz | 17.5 | 24 | 24 | 24 |
| 230V/3 phase/60 Hz | 15.2 | 22 | 22 | 22 |
| 460V/3 phase/60 Hz | 7.6 | 11 | 11 | 11 |
| 575V/3 phase/60 Hz | 6.1 | 9 | 9 | 9 |
| Noise level | ||||
| Standard with hopper soundproofing | 85-90 dbA | |||
| Optional with hopper and base soundproofing | 80-85 dbA | |||
| Optional with no soundproofing | 90-95 dbA | |||
Find your local Conair representative
Follow us on:
