|
Temperature Control Units - Portable Chillers - Central Chillers - Heat Exchanger - Cooling Towers - Pump Tanks - Cooling Water Strainers - Tower Water Filter Systems |
|
|
|
|
 |
• Temperature range 32° to 250°F (0° to 121°C) • Pump ranges from 0.33 to 0.5 Hp (0.25 to 0.37 kW) |
 |
• Temperature range 32° to 250° F (0° to 121° C) • Pump ranges from 0.75 to 7.5 Hp (0.56 to 5.6 kW) |
 |
• Temperature range 32° to 180° F (0° to 82° C) • Positive/negative pressure unit can be used as a temporary fix for leaky molds or bad O-rings |
 |
• Temperatures to 392° F (200° C) • Pump ranges 1.5 to 10 Hp (1.1 to 7.5 kW) |
 |
• Temperatures to 437° F (225° C) • Pump size 0.74 Hp (0.55 kW) |
 |
• Temperature range 70° to 500° F (21° to 260° C) • Oil process fluid |
 |
Thermolator TW-CD Series »
• Temperature range to 250° F (121° C) • Pump 0.75 Hp (0.56 kW) |
 |
• Temperatures to 392° F (200° C) • Pump ranges 1.4 to 10.1 Hp (1 to 7.5 kW) |
| All Products | Top of Page | |
 |
• 50° F (10°C) leaving water capacity range from 1.5 to 29.4 tons • Range of leaving water temperature 20° to 70° F (-7° to 21° C) |
 |
• 50° F (10°C) leaving water capacity range from 1.6 to 31.9 tons • Range of leaving water temperature 20° to 70° F (-7° to 21° C) |
| All Products | Top of Page | |
 |
Air-Cooled Models A-22SK to A-125SK » • Nominal capacity from 22 tons to 125 tons |
 |
Air-Cooled Models A-156SK to A-527SK » • Nominal capacity from 156 tons to 527 tons
|
 |
Water-Cooled Models W-86SK to W-163SK » • Nominal capacity from 86 tons to 163 tons |
|
Water-Cooled Models W-205SK to W-481SK » • Nominal capacity from 205 tons to 481 tons |
|
| All Products | Top of Page | |
 |
• Eliminatie fouling on cooling surfaces • Keep tower process water to within 3° or 5° of actual tower water at design heat load |
| All Products | Top of Page | |
 |
E1 Series Forced Draft Models » • Tower capacity from 10 to 75 tons • Blower motor from 1 hp (0.74 kW) to 7.5 hp (5.59 kW) |
 |
E2 Series Induced Draft Models » • Tower capacity from 55 to 250 tons • Fan motor from 2 hp (1.48 kW) to 15 hp (11.18 kW) |
 |
E3 Series Induced Draft Models » • Tower capacity from 250 to 500 tons • Fan motor from 2 x 5 hp (3.73 kW) to 3 x 10 hp (7.45 kW) |
 |
E4 Series Induced Draft Models » • Tower capacity from 300 to 810 tons • Fan motor from 2 x 5 hp (3.73 kW) to 4 x 15 hp (11.2 kW) |
|
|
|
| All Products | Top of Page | |
 |
• Capacity to overflow from 180 gallons (681 liters) to 1,100 gallons (4,164 liters) • Maximum recommended total flow from 110 gallons (416 liters) to 600 gallons (2,271 liters) |
 |
• Capacity to overflow from 1,525 gallons (5,773 liters) to 5,100 gallons (18, 965 liters) • Minimum operating capacity from 1,135 gallons (4,296 liters) to 3,940 gallons (14,915 liters) |
| All Products | Top of Page | |
 |
• Maximum flow of 100 to 2,000 gallons/minute (379 to 7571 liters/minute) • Heavier particulate and debris captured in reservoir; backflushing not required |
| All Products | Top of Page | |
 |
• Ideal media for suspended solids in cooling system • Includes centrifugal self-priming pump, pre-strainer, fiberglass vessel, bronze 3-way valves and control center |
| All Products | Top of Page | |
-
-
What You May Have Missed at NPE
 |
Request your copy of a booklet detailing the new and exciting products exhibited in Orlando. |
Contact us at: info@conairgroup.com
Upcoming Events
September 21-25, 2012: TaipeiPlas, Taipei, Taiwan
October 1-5, 2012: Colombiaplast 2012, Bogota, Colombia Booth 1618
Find your local Conair representative
