- Contact Us
- NPE 2015
- Shop
- Knowledge Center
- Industries Served
- Support
- Products
- Material Storage
- Conveying
- Tube Loader (TLM)
- Access™ (AL) Loaders
- DustBeater (DB) Series
- Tube Loader (TLA)
- CAML-EVB Evacuation System
- CAML-EVG Evacuation System
- Access™ (AR) Receivers
- Duraload (DL) Series
- Tube Loader (TLR)
- FL Filterless Receiver
- Powder Loader (PL)
- FLX-128 Loading Control
- ELC Series Controls
- B32 Loading Control
- ILS Loading Control
- ControlWorks™
- RG Vacuum Pumps
- PD Pumps
- Dust Collectors (DC)
- Adjustable Purge Valve
- Common Line Valves
- Ratio Valve
- Purge Valves
- Vacuum Railcar Unloading
- Resin Selection Station
- Selector Plates
- Access™ (JIT) Hopper
- Bulk Distribution Boxes
- K Loaders
- Handy Hopper
- Minature Handy Hopper
- Audible/visual alarm and alarm kits
- Filter Drawer
- MG Series Drawer Magnets
- Drying
- MDCW (15-100)
- W Dryers (15-100)
- MDCW (150-200)
- W Dryers (150-400)
- W Dryers (600-5000)
- EnergySmart™ Dryer (ES-1)
- EnergySmart™ System (ES-2)
- SlimLine (SL) Dryer
- Hot Air Dryer (HAD)
- HTC Temperature Controller
- GasTrac Process Air Heater
- CH Hoppers
- ResinWorks™ System
- CR Crystallizer
- DM-II Drying Monitor
- Floor Stand (FS)
- DM3-i Drying Monitor
- DH Hoppers
- DM3-e Drying Monitor
- DC-T TouchView Control
- Blending
- TrueBlend™ TB45
- TrueBlend™ TB100
- TrueBlend™ TB250
- TrueBlend™ TB250R
- TrueBlend™ TB500
- TrueBlend™ TB900
- TrueBlend™ TB1800
- TrueBlend™ TB2500
- TrueBlend™ TB3500
- TrueBlend™ High Heat
- TrueBlend™ Reporting
- Level Alarm Control
- WSB/GB Retrofit Control
- Material Mixer
- TBBS Models
- TrueBlend EXT
- TrueWeigh Continuous Blenders
- TBI Insulated Blender
- Feeding
- Heat Transfer
- Thermolator® Microtemp
- Thermolator® (TW) Series
- Thermolator® vacuTrac
- Thermolator® heaTrac
- TW-HT Series
- TW-HTM Series
- TW-ALT Series
- Chiller, EarthSmart™ (ECM)
- Chiller, EarthSmart™ (ECA)
- Chiller, EarthSmart™ (ECW)
- Chiller, Air (22-136)
- Chiller, Air (156SK - 527SK)
- Chiller, Water (86SK -268SK)
- Chiller, Water (205SK -481SK)
- Tower Isolation (PF) Series
- Cooling Tower (E1)
- Cooling Tower (E2)
- Cooling Tower (E3)
- Cooling Tower (E4)
- Pump Tank, Polymer
- Pump Tanks, Steel
- CFS Strainers
- SMF Filter Systems
- Granulation
- Upstream Extrusion
- Downstream Extrusion
- Parts
- About Us
Thermolator® Microtemp (MTC-1)
Temperature Control Unit
The microTemp water temperature controller is designed to maintain the process temperature with circulated water that has been heated or cooled to the required setpoint.
The microTemp is manufactured specifically for small processing machines, such as 80-ton or smaller injection molding machines.
Products » Heat Transfer » Thermolator® Microtemp (MTC-1)
- Compact, low-profile cabinet
- Lift-off access panel
- State-of-the-art controls
- Incoloy heaters
- Two-Year casters up warranty
Contact Us Form
Phone
+1 724 584 5500
Parts & Service
+1 800 458 1960 - United States
+1 814 437 6861 - International
 |
|
|
| MODEL | MTC-1 | |||
| Performance characteristics | ||||
| Minimum operating temperature | 20°F {-7°C} above cooling water | |||
| Minimum setpoint temperature | 32°F {0°C} | |||
| Maximum setpoint temperature | 250°F {121°C} | |||
| Pump Performance | ||||
| Pump Hp {kW} | 1/3 Hp {0.25} | 1/2 Hp {0.37} | ||
| Heater element | 3 kW | 6 kW | 3 kW | 6 kW |
| Nominal flow gpm {l/min} | 10 {38} | 25 {95} | ||
| Pressure@nominal flow psi {bar} | 15 {1.0} | 13 {0.9} | ||
| Dimensions inches {mm} | ||||
| A - Height | 18 {457} | |||
| B - Width | 15.5 {394} | |||
| C - Depth | 11 {279} | |||
| D - Height with hinged console open | 29 {737} | |||
| Weight lb {kg} | ||||
| Pump Size | 1/3 Hp {0.25 kW} | 1/2 Hp {0.37 kW} | ||
| Operating | 75 {34} | 79 {36} | ||
| Shipping | 85 {39} | 89 {40} | ||
| Water connections NPT (female) | ||||
| Process | 3/4 inch | |||
| Cooling | 1/2 inch | |||
| TOTAL FULL LOAD AMPS (all voltages are 3 phase, 60 Hz) | ||||||
| Heater | 3 kW | 6 kW | ||||
| Voltage | 208V | 230V | 460V | 208V | 230V | 460V |
| Pump | ||||||
| 1/3 Hp {0.25 kW} | 13.7 | 12.4 | 6.2 | 23.7 | 21.4 | 10.7 |
| 1/2 Hp {0.37 kW} | 14.2 | 12.8 | 6.4 | 24.2 | 21.8 | 10.9 |
Find your local Conair representative
Follow us on:
