For medical molders and processors of ultra-high temperature thermoplastics, the exceptional heat transfer properties of water optimize process efficiencies and deliver production of highest quality parts and faster cycle times for increased output.
TW-HTM water temperature control systems are plug-in solutions for processes requiring circulating mold tempera-tures up to 435ºF {225ºC}. The systems operate closed-loop under design pressures to 435 psi {30 bar}.
- Safer, oil-free operation
- Lower operating costs save money
- Faster tool changes
- Best process efficiency
- Faster cycle times: More production
Contact Us Form
Phone
+1 724 584 5500
Parts & Service
+1 800 458 1960 - United States
+1 814 437 6861 - International
Return and cooling water supply line strainers
Stainless steel piping and vessels
Incoloy tubular heaters
Soild state heater control relay with fail-safe pilot contactor
Hot/cold circuit pressure balance
Cooling side heat-exchanger bypass to dissipate steam
Control cabinet IP 54/NEMA-3 with casters
Heater element over-temperature safety cutout
Minimum flow sensor
Leak detection sensor
Differential pressure flow meter tied to heater-off switch and low flow rate alarm
Tubular-finned nickel alloy heat exhanger
Plug connection for external temperature sensor. Sensor activation can be via hard switch or set in the controller.
Remote control (with 49 foot {15m} cable)
Stainless steel sheathed hoses (for process water to 437ºF {225ºC})
Connection port for external temperature sensor
Decalcification unit
Special voltage/frequency
UL/CSA coded electrical panels
24V control voltage
Special paint
 |
| Model | TW-HTM-1-HK |
| Performance characteristics | |
| Max. temperature range °F {°C} | 437 {225} |
| Max. external volume gal {l} | 0.93 {3.5} |
| Heating capacity heating circuit kW | 6 |
| Cooling capacity cooling circuit 176°F {80°C} flow and 59°F {15°C} cooling water cooling tons | 1 |
| Dimensions inches {mm} | |
| A - Height | 20.67 {525} |
| B - Width | 10.44 {265} |
| C - Depth | 25.4 {645} |
| Connections NPT inches (female) | |
| Process fluid (water) | 0.50 |
| Cooling fluid | 0.375 |
| Filling | 0.375 |
| Pump performance | |
| Maximum flow rate gpm {l/min} |
7.0 {25} |
| Maximum outlet pressure (typical) psi {bar} | 66 {4.5} |
| Pump capacity Hp {kW} | 0.737 {0.55} |
| Weight lb {kg} | |
| Installed | 287 {130} |
| Shipping | 587 {266} |
Find your local Conair representative
