Drying
Why Proper Drying is So Critical, and How the Wrong Drying Equipment can be a Liability
October 29, 2018 | Chad Stover - Technical Marketing Manager
The average processor has a small fortune tied up in processing equipment and plant facilities, and often even more in…
Conveying
Gaylord Tilters, Sweepers: What’s the difference?
October 22, 2018 | Doug Brewster, Conveying Products Manager
Processors have long relied on a simple technology, a pick-up lance or wand, connected to a vacuum system, to draw…
Aftermarket
What would you do if? Solving three head-scratching equipment problems
October 15, 2018 | Brian Dowler, Vice President, Aftermarket Service
Plastics processors know that it’s wise to be careful with a buck. Experience teaches if you can eliminate a problem…
Size Reduction
Plastics Granulator Maintenance for Regrinding
October 8, 2018 | Dave Miller, General Manager - Size Reduction
The regrind you produce should be free-flowing, cleanly cut, uniform in size, and free of dust and fines. That’s because…
Blending
Upgrading Your TrueBlend Blender from SB-1 to SB-3, the Easiest Decision You’ll Make All Week!
October 1, 2018 | Chad Stover - Technical Marketing Manager
There’s sometimes a problem with making the best equipment in the industry – it often lasts forever (or so it…