Designed for long-lasting reliable industrial performance, these systems convey up to 30,000 lbs./hr. at distances up to 1000 feet, for line sizes from 4-inch to 6-inch. Bulk unloading from railcars to silos for high-rate applications.

Conair’s Pull/Push railcar unloading system moves free-flowing pellets or powders using modular dual-pump systems (DPDM) or single-pump packages (SPSM).

A variety of options ensure that the system meets the processing needs of your facility. The system can be equipped with: cyclone receiver with angel hair remover, filter receiver in-line for angel hair mitigation and dusting, aftercooler on the pressure blower, variable frequency drives (VFDs), separate receivers to avoid cross-contamination, and railcar empty alarms.

Easily achieve high capacity conveying performance for bulk unloading from railcars to silos without the high cost of conventional vacuum/pressure units in the same pounds-per-hour range.

Conair’s Cycling Loader works on a simple principle that delivers thousands of pounds per hour over long distances with one hopper and one pump, but without pump reversal and without using a rotary feeder. A series of trouble-free flapper valves and a four-way air flow reversing valve make the Cycling Loader a convenient, self-contained system that alternately uses the vacuum hopper as a pressure hopper. One 25 horsepower Positive Displacement Pump provides both the vacuum and the pressure power by the action of the reversing valve.

Simple to operate and easy to maintain, the system requires minimal attention and features an easy-to-use control. The self-cleaning feature eliminates typical maintenance while the ground level dust collector and silo-mounted stainless steel receiver provide easy access for filter changes. The VRU is a reliable, low cost and simple solution for your railcar unloading requirements.

Conair’s welded silos are shipped factory constructed and ready to install in one day and use immediately. Because there are no bolts, seams or gaskets, material hang up points are eliminated.

The inside of the welded steel silo is epoxy coated to keep your material contamination free. The outside is primed and enamel coated to prevent rusting. Welded aluminum silos require no external painting or internal epoxy coating.

The welded silos are guaranteed to be water-tight.

Structurally tough. Contamination-free. Conair’s aluminum silos are designed to match the rigidity of a steel structure. Unlike a steel structure, this silo requires no external painting or internal epoxy coating. In fact, no routine maintenance is needed inside or out.

Aluminum silos keep your expensive material in pristine condition, free from contamination due to rust or flaking. The silos are guaranteed to be water-tight.

Conair’s bolted steel or aluminum silos are shipped unassembled. They can be shipped virtually anywhere in the world and assembled at the customer’s plant.
The individual panels of a bolted steel silo are epoxy coated on the inside to keep material contamination free. The outside is primed and enamel coated to prevent rusting. Aluminum panels do not require internal or external painting or coating.

Conair offers a complete line of in-plant mobile surge bins for convenient storage of a variety of materials. Stackable Conair Mobile Surge Bins accommodate your storage needs with a range of bin capacities from 10 ft3 to 50 ft3.* For critical applications requiring a contamination free environment, bins can be constructed in stainless steel with or without lids.

Conair offers a complete line of in-plant surge bins for convenient storage of a variety of blended or virgin materials. Conair Surge Bins accommodate your storage needs with a range of bin capacities from 17 ft3 to 514 ft3.

For critical applications, bins can be constructed of contamination free stainless steel. Conair Surge Bin lids are pre-drilled to accept your choice of Conair loading and blending equipment.

Conair Tilters provide a safe method of moving free-flowing materials to one corner of a shipping container for complete emptying by a vacuum loader. These newest tilters include a built-in safety ratchet, which does not allow tilt-back of the tilter until the operator desires. This prevents the possibility of pinch points under the gaylord and tilter. Conair Tilters are built tough to withstand heavy use on production floors.

The tilters can be used beside your processing machines or in remote central material storage rooms to assure a constant flow of material throughout your plant. Once emptied, simple foot- or hand-operated controls level the container for removal and replacement.