Designed for long-lasting reliable industrial performance, these systems convey up to 30,000 lbs./hr. at distances up to 1000 feet, for line sizes from 4-inch to 6-inch. Bulk unloading from railcars to silos for high-rate applications.

Conair’s Pull/Push railcar unloading system moves free-flowing pellets or powders using modular dual-pump systems (DPDM) or single-pump packages (SPSM).

A variety of options ensure that the system meets the processing needs of your facility. The system can be equipped with: cyclone receiver with angel hair remover, filter receiver in-line for angel hair mitigation and dusting, aftercooler on the pressure blower, variable frequency drives (VFDs), separate receivers to avoid cross-contamination, and railcar empty alarms.

Easily achieve high capacity conveying performance for bulk unloading from railcars to silos without the high cost of conventional vacuum/pressure units in the same pounds-per-hour range.

Conair’s Cycling Loader works on a simple principle that delivers thousands of pounds per hour over long distances with one hopper and one pump, but without pump reversal and without using a rotary feeder. A series of trouble-free flapper valves and a four-way air flow reversing valve make the Cycling Loader a convenient, self-contained system that alternately uses the vacuum hopper as a pressure hopper. One 25 horsepower Positive Displacement Pump provides both the vacuum and the pressure power by the action of the reversing valve.

Simple to operate and easy to maintain, the system requires minimal attention and features an easy-to-use control. The self-cleaning feature eliminates typical maintenance while the ground level dust collector and silo-mounted stainless steel receiver provide easy access for filter changes. The VRU is a reliable, low cost and simple solution for your railcar unloading requirements.