High-Intensity Spray for more Rapid Cooling

Conair MSBHI Series cooling tanks produce a high-pressure spray that cools tube and profile extrusions faster and in less space than immersion tanks.
For pipe and tube of significant mass, immersion tanks compromise cooling efficiency due to the formation of an insulation layer over the hot product surface. MSBHI high intensity spray tanks eliminate this problem and increase cooling efficiency through the process of extreme turbulent cooling. Cooling water droplets striking the hot surface rapidly conduct the heat away and are driven off in a continuous process.

Easy to operate

Built-in water manifold system has water valves dedicated to each spray chamber. Individual spray bars control the direction of the spray to optimize cooling for each product’s geometry. Quick dump valves are provided for draining the tank.

Stainless-steel components

The tank, water reservoirs, and drip pans are stainless steel. Other surfaces are painted for corrosion resistance.

Tank lengths of 16 to 24 feet {4.9 to 7.3 meters}

The MSBHI is available in a range of sizes; from a 16-foot {4.9 meters}, two-chamber tank to the 24-foot {7.3 meters}, three-chamber tank.

  • Thermometer for upper tank or reservoir
  • 7.5 Hp water circulation system including high performance stain less steel brazed plate heat exchanger. For extrusion rates less than 600 pounds per hour. Rated for 180 gallons per minute at 40 psi based on 45 °F chiller temperature and 30 gallons per minute flow rate to the heat exchanger. Includes 3 inch turbo filter which is rated for 200 gallons per minute
  • 10 Hp water circulation system including high performance stain less steel brazed plate heat exchanger. For extrusion rates less than 800 pounds per hour. Rated for 220 gallons per minute at 40 psi based on 45 °F chiller temperature and 45 gallons per minute flow rate to the heat exchanger. Includes two 3-inch turbo filters which are rated for 200 gallons per minute
  • Additional 2-inch or 3-inch turbo filter with three way valve and two check valves enabling in line switching of filters for cleaning
  • Built in rail system with electronic actuator with 36-inch travel and single speed of 0.6 inches per second forward and reverse
  • AC Inverter and selector switch allowing slow speed 0.2 inches per second and fast speed 0.6 inches per second via selector switch
  • 5 Hp liquid ring vacuum pump powered by 7.5 Hp motor and 72 cubic feet per minute. For vacuum levels up to 20 inches of mercury All chambers are connected to the single vacuum pump and served by one common integrated reservoir
  • Belt-on-air wipe chamber includes lock line nozzles
  • Special roller rack system for solid profiles