Re-Engineered for Energy Savings; Increased Performance

The new Thermolator® TW-S Series takes everything that you loved about Conair’s reliable Thermolators of the past, and improves upon performance and available options. The TW-S offers a wide variety of options and features to make maintaining the process temperature at your required setpoint simple.

All models offer incoloy heaters; silicon carbide pump seals; pressure gauges; easy-to-use controls and tool-free access panels for fast removal. The TW-S options include: rotary non-fused disconnect switch, C-UL508A industrial control panel construction, hand-held remote control panel, solid state relay heater controls, brazed plate heat exchangers in two sizes, 300°F {149°C} maximum operating temperature and vertical unit stacking rack.

View the complete line of temperature control units.

Buy Now

State-of-the-art controls

Microprocessor controls offer uniform temperature control regardless of external loading. Status lights, process supply and setpoint values are displayed on the control simultaneously. Built-in features include: cool down sequence, pump running hours count, temperature deviation alarms & warnings, adjustable alarm delay times, toggle to process return temperature, alarm horn & silence switch, error diagnostics and independent start and stop buttons.

Energy savings

This new generation of Thermolators is much more efficient. Offering as much as 50% increase in the pump operating envelope, an application that may have previously required a 5 Hp {3.73 kW} pump may now only require a 2 Hp {1.49 kW} pump. PLUS, today’s pumps use less energy than their predecessors. Average yearly operating cost savings of the new Thermolators is $740 per unit. Conair Sales can help determine which Thermolator suits your needs.

Higher-efficiency pumps

More efficient pumps— 36% wire to water to be exact. 3/4 Hp {0.56 kW} to 10 Hp {7.46 kW} pumps are available and feature silicon carbide seals and sediment traps for extended seal life. Cast iron impellers are standard.

TW-P Thermolator gauges
Built-in pressure gauges

Built-in pressure gauges are standard for all Conair TW Series Thermolators

Thermolator incoloy heaters
Incoloy heaters

Minimize chemical and high temperature damage

Thermolator three-piece cast construction
Three-piece cast construction

Eliminates potential leak points

Thermolator sediment trap
Built-in sediment trap

Settles contaminants away from the pump seals

MedLine® compressed air purge valve
Compressed Air Purge Valve

Quickly evacuates fluid from the process circuit, allowing for faster, cleaner disconnection of the temperature controller from molds and hoses.

MedLine® modulating cooling valve
Modulating Cooling Valve

Fully modulating cooling valve provides consistent temperature control while eliminating water hammer issues.

MedLine® alarm packages
Alarm Packages

Call attention to alarm conditions with red alarm strobe light.

Stacking Rack

Save floor space by stacking TCUs two-high. The stacking rack can be used only with single-zone models.

Closed Circuit with Two Brazed Plate Heat Exchanger Sizes

Offers greater performance, greater capacity, and less pressure drop.

Communications Options

Autostart/Remote start, Remote alarm dry contact, Remote temperature sensor.